top of page
Yabby 3 GPS Tracker

Yabby 3 GPS Tracker

AU$195.00Price

Compact and ultra-rugged battery-powered GPS asset tracker featuring up to 10+ years battery life

  • Deploy-once battery life with up to 10+ years on only 3 x AAA user-replaceable batteries
  • Tracks assets when they’re on the move and enters sleep mode when stationary to conserve power
  • ‘Battery Low’ and ‘Battery Critical’ alerts
  • Weatherproof and ultra-rugged IP67 housing – 5 x 63 x 24 mm (3.35 x 2.48 x 0.94”)
  • LTE-M / NB-IoT Connectivity
Quantity
  • Product Information

    CONNECTIVITY
    The Yabby3 is available in LTE-M/NB-IoT
    LTE-M / NB-IoT
    (supports roaming between networks – roaming SIM required) Nordic nRF9160 Modem operates on all major global LTE-M and NB-IoT bands.
    Supported LTE bands:
    LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B66
    NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66
    SIM Size & Access Internal Nano 4FF SIM

    BATTERIES
    User-Replaceable Batteries 3 x AAA. Batteries not included.
    Supported Battery Types Alkaline
    *Lithium (LiFeS2) – recommended for best performance
    *Please dispose of Lithium batteries in a safe and responsible manner.
    **Battery Life Estimates Once Daily location updates – 10+ years
    Movement-Based location updates – 3 years
    Hourly location updates – 1.5 years

    LOCATION
    GNSS Module Sony CXD5605
    Constellation Concurrent GPS, GLONASS, Galileo, QZSS
    Tracking Sensitivity -147dBm cold start / -161dBm hot start
    Location Accuracy ~1m 2D RMS, GPS, -130dBm
    GNSS Assistance GNSS almanac and ephemeris data for greater sensitivity and position accuracy
    Low Noise Amplifier GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail
    Cell Tower Location Cell tower location fallback for positioning when GPS can’t get a fix

    POWER
    Input Voltage 3-5.5V DC
    Sleep Current <10uA*
    *Average current in lowest power configuration

    MECHANICS / DESIGN
    Dimensions Standard – 84 x 63 x 24 mm (3.31 x 2.48 x 0.94”)
    Livestock Collar – 109 x 60 x 30 (4.29 x 2.36 x 1.18”)
    Snap Housing (Smallest Size, not IP67 rated) – 75 x 45 x 25 mm (2.95 x 1.77 x 0.98”)
    Weight 80g
    Housing Ultra-Rugged IP67 Housing. Non-branded housing for optional white-labeling.
    IP Rating IP67 rated housing ensures device can withstand fine dust, high-pressure spray, submersion for 30 mins in 1m of water, and extreme temperatures
    Installation Compact and concealable. Multiple installation options for covertly and easily securing the device to assets with screws, bolts, cable ties, rivets, and more. Stainless steel screws provided.
    Operating Temperature -30°C to +60°C
    For operation in extreme temperatures use LTC Batteries
    Cellular Antenna Internal
    GPS Antenna Internal
    3-Axis Accelerometer 3-Axis Accelerometer to detect movement, high G-force events, and more
    Diagnostic LED Diagnostic LED indicates operation status
    Flash Memory Store weeks of records if device is out of cellular coverage. Storage capacity for over 2 weeks of 2-minute logging.
    On-Board Speed and Heading Current speed and heading is reported with each position update
    On-Board Temperature The device reports internal temperature which provides an indication of ambient temperature but may not always be precise

    SMARTS
    Auto-APN Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware
    Battery Life Monitoring ‘Battery Low’ and ‘Battery Critical’ alert levels
    Geofence Alerts The server can use device location to create geofences and alerts if an asset enters or leaves designated locations
    Geofence Download to Device Geofences can be downloaded directly to the device from Telematics Guru for enhanced location-based actions and alerts. Maximum of 100 Geofences with up to 100 points per geofence.
    Impact Detection Configure impact-detection alerts when G-forces are exceeded by a user-defined threshold
    Intelligent Power Management Early registration abort and location scan throttling options
    Periodic or Movement-Based Tracking Configure parameters to send updates based on set time intervals or when movement occurs. Adaptive tracking technology detects when the device is on the move and increases the update rate, providing detail when you need it while conserving battery when stationary.
    Preventative Maintenance Set reminders based on distance traveled and run hours to reduce maintenance and repair costs
    Run Hour Monitoring Capture run hours based on movement to understand and optimize asset utilization

    Sleep Mode Stationary devices enter sleep mode until movement occurs to conserve battery life and optimize data usage
    Theft Recovery Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval
    Tip Detection & Rotation Counting Axis angle reporting, tip detection and rotation counting (planned)

    DEVICE MANAGEMENT
    Flexible Configuration Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application
    Device Management Platform Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system

    Configuration App Configurable with DM-Link provisioning tool

    INTEGRATION
    Third-Party Integration TCP Direct or HTTPS Webhook

    SECURITY
    Data Security Military-level AES-256 Encryption from device to OEM Server to protect the integrity and confidentiality of telematics data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.

    WARRANTY
    Manufacturer’s Warranty Two-year manufacturer’s warranty. Exclusions apply.

    CERTIFICATIONS
    LTE-M / NB-IoT – FCC, ISED, UKCA, CE, ACMA RCM, EMC, RoHS
    Visit support.digitalmatter.com for full device certifications for your region

    **Battery life estimates are influenced by several factors including temperature, installation and orientation of the device, the frequency of location updates, network coverage, sensor integrations, peripherals, accelerometer settings, and more. Estimated battery life calculators are available at support.digitalmatter.com.

    Our devices work best integrated with our Telematics Guru software, click here to view subscription options, or you will be emailed more information after you have purchased your devices.

     

    If you have any questions or need help with device installation please do not hesitate to contact us.

     

    If you would like to purchase our hardware without subscribing to our software, please contact us as monthly charges apply.

    * User subscription required to access live tracking functionality via the mobile app. Subscriptions are managed by third party provider.

  • Shipping

    Free standard shipping Australia wide on all orders above $50

    Express Post calculated at checkout

    Please note we do not ship to PO Boxes.

    Large or bulky orders may incur additional shipping charges

  • Facebook
  • Instagram
FOLLOW US

Related Products

bottom of page